Optimized cleaning performance for maximum useful lifetime
|Article||Article number||Class to ISO 16890||Filter class acc. to ISO 29461-1||Filter class acc. to EN 779:2012||Nominal volume flow
(m³ / h)
|Initial pressure drop
|Construction height (mm)||Filter class acc. to ASHRAE 52.2:2017||Outer diameter (mm)|
|GTS 324 W66S0||53526096||ISO ePM1 75%||ISO T8||F9||1100||130||660||MERV14||327|
|GTS 445 K66S0||53526099||ISO ePM1 75%||ISO T8||F9||1400||-||660||MERV14||445 / 327|
|GTS 324-445 Set (Conical-Cyl.)||-||ISO ePM1 75%||ISO T8||F9||2500||135||1330||MERV14||445 / 327|
|GTS M15 324 W66S0||53551357||ISO ePM1 85%||ISO T9||F9||1100||135||660||MERV15||327|
|GTS M15 445 K66S0||53551358||ISO ePM1 85%||ISO T9||F9||1400||-||660||MERV15||445 / 327|
|GTS M15 324-445 Set (Conical-Cyl.)||-||ISO ePM1 85%||ISO T9||F9||2500||140||1330||MERV15||445 / 327|
|GTS10 445 K66S0||53578773||ISO ePM1 >95%||ISO T10||-||1400||-||660||MERV16||445|
|GTS10 324-445 Set (Conical-Cyl.)||-||ISO ePM1 >95%||ISO T10||-||2500||165||1330||MERV16||445 / 327|
|GTS10 324 W66S0||53578771||ISO ePM1 >95%||ISO T10||-||1100||150||660||MERV16||327|
ApplicationsPulse-jet filter cartridges of GTS conical-cylindrical series are used for intake air filtration of gas turbines and turbo compressors at both onshore and offshore installations. They are particularly suitable for locations with critical on-site conditions like desert areas or tropical climates with high relative humidity.
GTS conical-cylindrical pulse-jet filter cartridges, with their optimized self-cleaning characteristics, maximize the lifetimes of intake air systems for turbomachinery and reduce the operating costs significantly.
Innovative high-strength synthetic microfiber nonwovens with water repellent coating enable the GTS series to maintain excellent operational characteristics in all climatic duty conditions including high humidity locations.
The filter medium achieves high arrestance performance, large dust holding capacity, a low average pressure drop and high cost-efficiency.
GTS filter cartridges have been optimized in terms of filtering area and pleat geometry. The active filtering area remains completely effective over its entire operating lifetime.
To minimize corrosion, the inner and outer support cages, plus the cover and base, are made from galvanized steel or stainless steel. These components are cast in a leakproof configuration, so as to ensure maximized security against dust breakthrough during pulse-jet cleaning.