Mounting Frames
For an Optimal Fit of the Filter Elements
Applications Features
Article | Dimensions (W x H x D) [mm] | Suitable for filters in the dimensions (mm, approx.) | |
---|---|---|---|
ARV-LD NF 1 / 1 Aluminum Galvanized Frame with Seal | 610 x 610 x 75 | 1 / 1 592 x 592 | |
ARE-LD NF 1 / 1 Aluminum Stainless Steel Frame with Seal | 610 x 610 x 75 | 1 / 1 592 x 592 | |
ARV-LD NF 5 / 6 Aluminum Galvanized Frame with Seal | 508 x 610 x 75 | 5 / 6 490 x 592 | |
ARE-LD NF 5 / 6 Aluminum Stainless Steel Frame with Seal | 508 x 610 x 75 | 5 / 6 490 x 592 | |
ARV-LD NF 1 / 2 Aluminum Galvanized with Seal | 305 x 610 x 75 | 1 / 2 287 x 592 | |
ARE-LD NF 1 / 2 Aluminum Stainless Steel Frame with Seal | 305 x 610 x 75 | 1 / 2 287 x 592 | |
ARV-LD NF 1 / 4 Aluminum Galvanized Frame with Seal | 305 x 305 x 75 | 1 / 4 287 x 287 | |
ARE-LD NF 1 / 4 Aluminum Stainless Steel Frame with Seal | 305 x 305 x 75 | 1 / 4 287 x 287 |
Applications
Application: Construction and rebuilding of air handling systems with any desired dimensions.Use: Secure holding of Viledon pocket filters and cassette filters (MaxiPleat, NanoPleat, CarboPleat, DuoPleat).
Construction: Stainless high-grade steel (Material 1.4301) or galvanised steel sheet (U-St 1203), burr-free, inherently rigid, in 4 sizes, positive clamp spring system with mechanical locking.
Features
High inherent rigidity thanks to special jointing process and large construction depth.
Centering guides assure optimum positioning of the filter elements.
Consistent leakproofing thanks to four friction-locked clamping springs, which are fixed in position in “locking noses”.
The shape of the springs enables the filters to be easily installed and removed, since the free cross-sectional area of the mounting frame is available in full.
The boreholes for the screws have been selected so as to ensure that mounting frames of different sizes can be combined without any problems.
An ultra-flexible, silicone-free rubber clip-on seal with a hollow compartment is supplied with the frame. The clip-on seal is weatherproof and thermally stable within a range of approx. −40 °C to +100 °C, with good resistance to alcohols, lyes and weak acids, and very long-lived.
Depending on the size of the filter wall, and the stresses acting on it, we
recommend providing additional reinforcements as a substructure. M 6 × 8 screws should be used for affixing the frames; if reinforcements are provided, then correspondingly longer screws must be selected.